Effect of post-metallization annealing on the ferroelectric properties of sol-gel derived PZT thin films

A series of monolithic Pt-PZT-Pt capacitors was prepared based on sol-gel derived PZT 53/47 films fired to 700 C. After deposition of top Pt electrodes, the capacitors were subjected to post-metallization annealing (PMA) temperatures of 100 C to 700 C. Dielectric and ferroelectric (FE) characterizations were performed. Increasing the PMA temperature produced lower values of spontaneous and remanent polarizations, dielectric constant and leakage currents. The observations are correlated with a proposed FE capacitor model.     

Molecular orbital momentum distributions and binding energies for nitric oxide

Binding energy spectra of the valence electrons of the open shell molecule NO have been obtained up to 55 eV at azimuthal angles of 0° and 7° using binary (e, 2e) spectroscopy at an impact energy of 1200 eV. The momentum distribution has been obtained for the least tightly bound (unpaired) electron, removal of which leads to formation of the X ¹Σ⁺ ground state of NO⁺. Momentum distributions have also been measured at 21.0 and 40.5 eV. The measured momentum distributions are compared with several literature wavefunctions of varying complexity. They are found to be in excellent agreement with those calculated using the natural spin orbital wavefunctions of Kouba and Ohrn.     

Improved quantitation of 2,4-dichlorophenol in plant tissues by high-performance liquid chromatography with amperometric detection

For the determination of 2,4-dichlorophenol (DCP) residues in plant tissues, the use of high-performance liquid chromatography with amperometric detection decreases the quantitation limits by a factor of five compared to those obtained with gas chromatography with Hall conductivity detection. It also avoids the clean-up and derivatization procedures required for electron-capture detection. After extraction of DCP from plant tissue by steam distillation and collection in toluene, an alumina clean-up column is used to remove electroactive interferences from the samples. The DCP is then extracted into aqueous alkaline solution, neutralized, and diluted with acetonitrile to ca. 50% (v/v). An alternative clean-up made use of an in-line, pre-column electrochemical procedure, in which case the alumina column was not used. The components were separated with a reverse-phase column and detected with a polychlorotrifluoroethylene/graphite composite electrode at an applied potential of +1.0 V vs. Ag/AgCl. The quantitation limit for DCP in the plant tissues was 100 pg per injection (0.05 mg Kg^?1).     

First example of a di-cadmium tris-phthalocyanine triple-decker sandwich complex

An unprecedented M(II)2Pc3 (M = Cd) triple-decker sandwich complex has been synthesized and characterised by single crystal X-ray crystallography; cyclic voltammetry shows an unusually large range of redox states and EPR spectroscopy indicates that the material exists in at least two redox states, one having spin (1/2).     

Synthesis of novel C-2 substituted pyrimidine nucleoside analogs

A series of 2-(2-oxoalkylidene)-4(1H)-pyrimidinone nucleoside analogs were synthesized by the addition of the lithium enolates of methylketones to 2,5′- and 2,2′-anhydrouridines and to 2,5′-anhydrothymidines. Alternatively, 2-thiouridine was alkylated with bromomethyl ketones to yield 2-(2-oxoalkyl)thio-4(1H)-pyrimidinone ribofuranosides in good yields. These intermediates were subsequently transformed into the title compounds via an Eschenmoser sulfur extrusion reaction. The 2-(2-oxoalkylidene)-4-(1H)-pyrimidinone nucleoside analogs exhibit enol proton signals in their ¹H nmr spectra indicative of hydrogen bonding between N-3 and keto oxygen. These structures offer functional groups with potential for Watson-Crick hydrogen bonding.     

Infrared emission following photolysis of methylisothiocyanate and methylthiocyanate

Methylisothiocyanate (CH(3)NCS) was photolyzed at 193 and 248 nm, and the resulting time-resolved infrared emission was observed. Similar experiments were performed on methylthiocyanate (CH(3)SCN) photolyzed at 193 nm. Previous work suggested that these isomers undergo excited-state isomerization prior to dissociation, but other experiments have contradicted this claim. In the infrared emission experiments, we observed the same products from both starting materials, supporting the theory of excited-state isomerization prior to dissociation. Methylisothiocyanate is the active ingredient in a widely used pesticide and has been observed to form highly toxic methyl isocyanate (CH(3)NCO) under environmental conditions. The mechanism for this formation has been unclear, but must involve some oxygen-containing species. At 248 nm, methylisothiocyanate was photolyzed alone and with three atmospheric oxidizers: O(2), NO, and NO(2). No chemical reaction was observed with O(2), whereas secondary reactions were observed with NO and NO(2). When methylisothiocyanate was photolyzed with NO(2), methyl isocyanate (CH(3)NCO) was observed, suggesting a likely environmental mechanism for methyl isocyanate formation.     

Flavylium chromophores as species markers for dragon's blood resins from Dracaena and Daemonorops trees

A simple and rapid liquid chromatographic method with diode-array UV-vis spectrophotometric detection has been developed for the authentication of dragon's blood resins from Dracaena and Daemonorops trees. Using this method it was discovered that the flavylium chromophores, which contribute to the red colour of these resins, differ among the species and could be used as markers to differentiate among species. A study of parameters, such as time of extraction, proportion of MeOH and pH, was undertaken to optimise the extraction of the flavyliums. This method was then used to make extracts from samples of dragon's blood resin obtained from material of known provenance. From the samples analysed 7,6-dihydroxy-5-methoxyflavylium (dracorhodin), 7,4'-dihydroxy-5-methoxyflavylium (dracoflavylium) and 7,4'-dihydroxyflavylium were selected as species markers for Daemonorops spp., Dracaena draco and Dracaena cinnabari, respectively. The chromatograms from these samples were used to build an HPLC-DAD database. The ability to discriminate among species of dragon's blood using the single marker compounds was compared with a principal components analysis of the chromatograms in the HPLC-DAD database. The results from the HPLC-DAD method based on the presence of these flavylium markers was unequivocal. The HPLC-DAD method was subsequently applied to 37 samples of dragon blood resins from the historical samples in the Economic Botany Collection, Royal Botanic Gardens, Kew. The method identified anomalies in how samples in this collection had been labelled. It is clear that the method can be used to evaluate the provenance of samples used in different areas of cultural heritage. It also could be used to monitor the trade of endangered species of dragon's blood and the species being used in complex formulations of traditional Chinese medicine.     

Structure of tetraphenylarsonium tricyano- 2,2′,6′,2′′-terpyridylferrate(II), AsPh4[FeII(terpy)(CN)3]; and kinetics of oxidation of the complex anion by peroxodisulfate in water and in binary aqueous mixtures

The structure of the title compound has been determined by X-ray crystallography. The octahedral arrangement of ligands about the iron(II) centre is somewhat distorted, with the axial NC–Fe–CN bond angle being 174.3(4)°. The oxidation of the tricyano-2,2,6,2- terpyridylferrate(II) anion by the peroxodisulfate anion has been investigated in water and in binary aqueous mixtures. The reaction follows a second order rate law, with a second-order rate constant of 0.126± 0.001dm3mol–1s–1 at 295.2K. The enthalpy and entropy of activation in water are 51.3±1.8kJmol–1 and –89±5JK–1mol–1 respectively. The rate is retarded on addition of organic cosolvent. The transfer chemical potential of the initial state from water into mixed solvents has been determined from solubility measurements, and compared with the transfer potential of the transition state. Solvent effects on the reaction are discussed in terms of initial state versus transition state solvation.     

Suzuki cross-coupling of solid-supported chloropyrimidines with arylboronic acids

The utility of the Suzuki cross-coupling to synthesize biaryl compounds is expanded herein to include reactions of resin-supported chloropyrimidines with boronic acids. In particular, an efficient method is described for the synthesis of a library of biaryl compounds from solid-supported chloropyrimidines. The Suzuki reaction was performed in an inert atmosphere using Pd(2)(dba)(3)/P(t-Bu)(3) as catalyst, spray-dried KF as base, and THF as solvent. The reaction was allowed to proceed overnight at 50 degrees C. Upon cleavage with acid, a library of 4-(substituted amino)-6-arylpyrimidines was obtained in moderate yield and high purity.     

Organocatalytic living ring-opening polymerization of cyclic carbosiloxanes

[reaction: see text] An organocatalytic route to narrowly dispersed poly(carbosiloxanes) of predictable molecular weight and end group fidelity is described. N-Heterocyclic carbenes (NHC) and 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) catalyze the ring opening of cyclic carbosiloxanes. The pK(b) of the catalyst is important in preventing adverse transetherification reactions and obtaining well-defined polymers. Mechanistic studies indicate that hydrogen bonding to TBD or the NHC activates alcohols or silanols for ring-opening reactions.